[Jamerson81m]

Hello everyone Please Help!!!
Our 110 will not run and we are going through what could be wrong with it. It has a new battery. When it was running you could hear the fuel pump run and now you can’t. So we tool it out and all the connections are good and when you hook it battery the fuel pump runs on low voltage but we hooked everything back up and turned the key and it doesn’t run. We are at a lost, we have been checking every connection and so far everything beeps and the fuses in the fuse box are all good. What are we missing? Does it have a fuel safety switch? If so where. Does it have a inline fuse that is wrapped in electrical tape? If so where. Last thing Does it have a EFI relay? If so where. For the love of God!!! This is so frustrating.

 

[latebird]

It will be easier and more time effective to take it to a dealer with the Digital Wrench Diagnostic software.

Yes, there is a fuse and a relay and the ECM - the ECM controls the relay and the relay controls the fuel pump.

I have attached the wiring diagram from the service manual (it's made by Aeon in China)

 

[brickmason03]

Hello everyone Please Help!!!
Our 110 will not run and we are going through what could be wrong with it. It has a new battery. When it was running you could hear the fuel pump run and now you can’t. So we tool it out and all the connections are good and when you hook it battery the fuel pump runs on low voltage but we hooked everything back up and turned the key and it doesn’t run. We are at a lost, we have been checking every connection and so far everything beeps and the fuses in the fuse box are all good. What are we missing? Does it have a fuel safety switch? If so where. Does it have a inline fuse that is wrapped in electrical tape? If so where. Last thing Does it have a EFI relay? If so where. For the love of God!!! This is so frustrating.

 

[brickmason03]

Hello, HELP
I'm having the same issue as Jamerson81.I have the exact quad. I was wondering if anyone came up with fix or solution to the fuel pump problem?
would apricate some input. thanks

 

[brickmason03]

j

 

[latebird]

Take it to the dealer

 

[Jmtow99]

Any resolution to this problem?

 

[polman500]

LOL... Sounds like the little machines have fuel pumps dying just like their bigger cousins. I wonder if the ass hats who insist on contaminating our fuel supply with alcohol are making money on fuel pumps too??

 

[latebird]

I wonder if the ass hats who insist on contaminating our fuel supply with alcohol are making money on fuel pumps too??

Probably - the Chinese can make alcohol for a fraction of what it cost's to make it here so it's most likely being imported and made from rice instead of corn.

 

[Jasonblevins]

jamerson81m @Jamerson81m
Did you ever figure out the problem because I’m having the same problem on my daughters 110 ?

I have two 110s so I started switching parts from the one that’s currently running this is what I’ve done can anyone help?
I have switched all the relays from the running one to the non-running one, switched the ECUs, The battery, ignition switch, voltage regulator,
I put power directly to the fuel pump and it works.

 

[latebird]

So it runs fine when you jump power directly to the fuel pump?

 

[Jasonblevins]

So it runs fine when you jump power directly to the fuel pump?

So when the fuel pump turns on by turning the key over I have fuel and spark, if I turn the key over and I don’t hear the fuel pump girl I do not have fuel and spark I lose both.

 

[azcotrucking]

So when the fuel pump turns on by turning the key over I have fuel and spark, if I turn the key over and I don’t hear the fuel pump girl I do not have fuel and spark I lose both.

This sounds like my issue as well, did you ever find a resolution?

 

[azcotrucking]

This sounds like my issue as well, did you ever find a resolution?

I figured my issue out, the brake safety switch is not working correctly. When I pull the switch out of the brake lever, it works fine, when it is in the correct spot the switch does not work.