Polaris ATV Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter #1
Wondering if anyone else is having issues with their plow shoes loosening up while plowing. Directions said to torque to 40 ft lbs which I did, and probably then some. I plowed tonight and pulled the machine into the garage and noticed the shoes dangling. The shoes are important because I have a gravel driveway and need to keep the blade off the ground. Thanks
 

·
Registered
Joined
·
1,181 Posts
Try some blue locktite or just double nut them. should keep the from coming loose.
 

·
Registered
Joined
·
13 Posts
Discussion Starter #3
Thanks for the advice, I'm going to try some lock washers and loctite and see if that does the trick, if not I might just stack some washers so the shoes are sitting at the hight I want them at and just use the supplied nylon lock but on the top side and snug it up.
 
1 - 3 of 3 Posts
Top