Polaris ATV Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
217 Posts
Discussion Starter #1
Hello everyone, new to Polaris owner, I purchased a used 2013 with @ 80hrs/800 miles that had the engine repaired by a dealer, seems to run well and not having any problems with it at the moment, ordered new ngk plugs to install this morning and will do a compression test while there just for reference, ill order a service manual latter today and wait for it to arrive, in the meantime is there a general range of what to expect on compression ? Thanks in advance !
 

·
Super Moderator
Joined
·
7,092 Posts
New they are in the 180 to 200 range. Anything close to that and you should be fine.
 

·
Premium Member
Joined
·
20,001 Posts
Welcome to the board!
 

·
Registered
Joined
·
3,230 Posts
850's are not nikasil coated.
 

·
Registered
Joined
·
152 Posts
I seen in the service manual i believe that the case number on the block can tell you if it is or not. 1 letter i believe tells it all.

Sent from my Xoom using Tapatalk
 
1 - 7 of 7 Posts
Top