Polaris ATV Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I was at the Highlifter Park in Shreveport this past weekend and my bike was doing just fine the whole ride till close to the end. I hit one hole that was pretty bad not too crazy and everything was just fine. Got to the next hole that wasn't bad I just got high centered and needed to put it in 4WD. Well my front wheels wouldn't engage any whatsoever. No noise from the front end, no trying to turn over or anything. So naturally I decided to back out of the hole (still in 4WD) and it worked fine? Puzzled I tried again going forward and nothing, backed out of the hole with 4WD working and basically it just refuses to go in 4WD in Low or High. Any help would be greatly appreciated.




2012 Sportsman 850xp
31'' skinny laws
1.5'' puck lift
Snorkeled
 

·
Premium Member
Joined
·
20,001 Posts
Welcome to the board!:med:
 

·
Registered
Joined
·
1,097 Posts
Welcome to the forum!
 

·
Registered
Joined
·
274 Posts
I wanted to say electrical problem from water.... until you said 4WD works in Reverse......
 
1 - 5 of 5 Posts
Top