Polaris ATV Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
ok I have a 94 400 4x4 and I pulled the piston and cylinder out. the crank case is full of oil and water how can I drain it?
 

·
Premium Member
Joined
·
20,001 Posts
Welcome to the board!:med:
 

·
Registered
Joined
·
14 Posts
Underneath there is a drain. Look for a small 10mm head bolt on the left side. There are actually three, one on the starter for the stator housing, one in the counterbalance case and one in the crankcase.
 
1 - 4 of 4 Posts
Top