'Mornin' everybody. Another FNG here. I'm not sure where I should post this, maybe someone could point me in the right direction. I have a '95 300 4X4. It started making a clunk in reverse when it was under load. I thought it sounded like it was coming fron the right front hub, so I took the hub apart. No problem there. The front chain was a little loose so I tightened it up and slapped everything back together. Now I have no 4x4 in forward or reverse, so of course the clunk is gone. The light on the AWD switch is on but there's no 4x4. I never fiddled with any electrical or anything, just the hub and the chain. It's possible the clunk could have been coming fron the chain, but I won't know until the 4x4's working. I hope it's not the chain in the gear case. It didn't sound like it was coming from there. Any suggestions? Thanks.