Polaris ATV Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
hi all,
new to the site, i have looked at the site before and have gotten alot of advise from the posts on here, which havehelped alot!....
but im having an issue with my 99 400 xplorer, i have rebuilt the front calipers, bled the brakes, and still nothing, i have checked the rear caliper, and have bled them as well..... the issue i am having is... i can pump the brakes, either the hand brake or foot brake, and the fluid will pump into the other master cyl. and over flow....if i pinch off the rubber hose to the foot brake, the hand brake is nice and hard and brakes work fine. just has me confused on what is going on with it, anyone have an idea??.... thanks in advance, hope to be riding soon !!
 

·
Registered
Joined
·
95 Posts
The line going the rear goes to a separate cylinder inside the rear caliper. If the seals are bad in the rear caliper it could be just pushing fluid into the other cylinder that is used by rear foot pedal .
 
1 - 4 of 4 Posts
Top