Polaris ATV Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I have a 2000 Trail Boss 325 and only one wheel will only spin, i have found out the axle shaft was just spinning inside the wheel hub. i took the wheel and the castle nut off and when start to pull on the hub and it starts to lock in the splines on the axle nut it goes in and out, how can i fix this or rig it up some how. Thanks
 

·
Premium Member
Joined
·
20,001 Posts
First welcome to the board!
 
1 - 2 of 2 Posts
Top