Polaris ATV Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
193 Posts
Discussion Starter #1 (Edited)
I replaced my oem in-tank fuel unit with another oem and did the best I could to insulate my fuel tank.

I bought a Carter pump to rebuild the old unit such that I have a spare ready to go. The connection from the pump to the pressure regulator looks like it needs to be about 5/16 i.d. fuel line. My current intention is to use Marine fuel line. I know this is ethanol tolerant on the inside but (since this will be entirely submersed in the fuel tank) I am concerned about the exterior. It will also be required to withstand up to about 90psi pressure. Does anybody know of a better product for this?
 
1 - 2 of 2 Posts
Top