Clutch cover
1 - 6 of 6 Posts
Ya Very good to hear! I have had a problem with mine rubbing for awhile now on my '97 500, had the stupid cover off at least three times and cant get it to stop rubbing. Just tried again today. Guess I need to drop a few more bucks and try the new cover.
Joined
·
24 Posts
I recently replaced the starter on my 97 explorer and the original cover wouldn't fit on properly. The groves on the top end just couldn't line up. Put a used but great shape cover on from a trail boss, fit great. Now I'm afraid to turn it over, the thing is rubbing so bad it's scary. Any thoughts on getting the old one back in shape and how it may have gotten that way?
1 - 6 of 6 Posts
Join the discussion
Recommended Reading
-
08 800 sportsman efi no speedo at all
Polaris Sportsmandoes the speedo have to be working for the 4X4 to work properly . Any help welcome .- 2
- 41
-
Need red front
Polaris Sportsmanso my daughter was taking hay up to her horse and the horse got friskie and kicked the front of my 2000 sportsman 500. I wanted to buy a new one, but they are no longer available. Does anyone know if another red off another year may work if it would be available? the official name for this is...- 6
- 85
-
-
Opinions on suspension settings for sportsman 1000
Polaris SportsmanCurious where everyone is running theirs. Mine when I got it was all 4 softest settings. Front end dove horrible, especially off throttle. I went 3 more clicks stiffer up front and 2 in the back. It definitely doesnt dive anymore but a bit stiff. I'm going to drop one spot on all 4. So 3 front...- 1
- 76
-
Put the 1000 in a water hole and now barely moves days later
Polaris SportsmanOn past machines they dried out quick, then good to go. It's been 2 days and it barely moves. And prior to going in the mud hole I see what I think is a maintenance icon flash when I first start it? Any help appreciated. I should be able to go through mud/water to bottom of seat without this...- 12
- 471
Join now to ask and comment!