Polaris ATV Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
56 Posts
Discussion Starter #1
What does the wrench symbol in the display mean?When purchased no manual included.I hope it's nothing bad.
 

·
Registered
Joined
·
15 Posts
Time to service quad. Set for 50hrs etc. You can get a owners manual on Polaris industries. All you have to do to reset is Lock parking brake,put in neutral,hold in the reverse/override button,turn key on as soon as display is activated release reverse override button. You will be in Diagnostic Mode. You use the reverse/override button to toggle thru the different screens.You reset the wrench/service manual by going to the service manual,press & hold thr reverse/override button for 3-4 sec,wait and wrench icon will stop flashing. You really need to get a owners manual & service manual. I found both on e-bay.....
Heres one for 08 800 its all the same on the digital dash its in PDF format. When you go to Polaris industries web site you can get the owners manual in PDF and save to your puter print out the pages you need no more dirty manuals
http://pi54.com/corp/manuals/Owners/9921169r03.pdf
 
1 - 2 of 2 Posts
Top