Polaris ATV Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Would like to put a Polaris Demand Drive AWD front hub assembly on an unrelated machine. Need to fit a tapered axle 1-1/8" on the large dia, and 1" on the small dia. Total available "length" is 5-3/4"; step-up in dia. occurs at 2-9/16" from outside tip of axle. If you know of one that fits, a part number would be appreciated.
 
1 - 2 of 2 Posts
Top