Polaris ATV Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter #1
I got a 01 250 trailblazer just put a new piston and rings in it .Has 120 # comp. when it turns over it will fire but will not run.When it is it turnnig over i can pump the throttle and it will start to run but never completly fire up.Anybody got any advice.one other thing i put a wiseco piston in it and it had 2 ports on each side the stock was flat all the way down does that matter
 
1 - 1 of 1 Posts
Top