[davechaplow]

I'm the new guy. I'm an experienced rider but I'm just learning about the mechanics. I'm doing the rear left CV/axle on my Polaris 400. The inner race fell apart the bearings fell out and the inner CV stayed in the transmission. I'm having a very difficult time trying to get it out any suggestions? I can't get anything in behind a pry it out and I don't have a slide hammer.

 

[zipper77]

a lot of auto part stores will loan you a tool with a deposit to use i would try one of them for a slide hammer

 

[FPD218]

I'm the new guy. I'm an experienced rider but I'm just learning about the mechanics. I'm doing the rear left CV/axle on my Polaris 400. The inner race fell apart the bearings fell out and the inner CV stayed in the transmission. I'm having a very difficult time trying to get it out any suggestions? I can't get anything in behind a pry it out and I don't have a slide hammer. View attachment 166478
View attachment 166477

to the forum

From the Official Forum Greeter, be careful of the other imposters.

 

[FPD218]

Some clamp a muffler clamp on to grip, or a vice grip. Spray a liberal amount of penetration oil behind it to free up the c clip and shaft splines

 

[Mike_B]

Another stuck axle thread

Working on a 2013 400HO for a family member. There is a laundry list of issues that needed attention. A new axle wasn't on the list but, I could hear it clicking when I rolled it in the garage. Of course, the CV cup is stuck in the transmission. I've soaked it with some PB blaster. Seems like...

www.polarisatvforums.com

 

[davechaplow]

Some clamp a muffler clamp on to grip, or a vice grip. Spray a liberal amount of penetration oil behind it to free up the c clip and shaft splines

Tried that. Wouldn't budge.

 

[FPD218]

Tried that. Wouldn't budge.

Put your purse down and hit it!

(Sorry just had to)!