Polaris ATV Forum banner

How do I rewire the ignition on a Polaris trail boss 250 with a different ignition? the wires don’t match.

140 Views 1 Reply 2 Participants Last post by  latebird
I have a ‘97 Polaris Trail Boss 250, the ignition was cut off so I bought an aftermarket one from Amazon. However, the wires that were cut on the trail boss do not match the wires that are on the new ignition. Does anybody know which ones connect and how to wire it together? I have attached pictures of the old ignition and the new ignition.
See less See more
1 - 2 of 2 Posts
On the wiring harness you connect red to red/blk when the switch is turned on and connect blk to brn when the switch is turned off
1 - 2 of 2 Posts