Polaris ATV Forum banner

How to grease the shaft on 2008 Sportsman 800

2K views 4 replies 5 participants last post by  Touring800EFI 
#1 ·
Hi everybody,
I know there is a zerk on the prop shaft, just behind the right foot well. I can see it but I cannot get my grease gun in there. Should I remove the foot well to do the greasing?
 
#2 ·
Move the ATV until the zerk is pointing in a direction where you can get the grease gun on it by coming in from the real wheel well. I eventually drilled a hole through the foot well that lined up with the zerk, this way I can frequently grease it with ease.
 
#5 ·
X3^^^
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top