Polaris ATV Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I broke the previous bracket and bought a new one for the handle bars on a 2001 Magnum 325. Any special process to replace and bleed? I was thinking I would need to replace master cylinder, fill and bleed at each wheel starting at the furthest. Can't seem to locate an online repair manual for help. Would appreciate any assistance before I start.
Thanks
 

·
Premium Member
Joined
·
20,001 Posts
First welcome to the board!
 

·
Registered
Joined
·
38 Posts
I would assume that the bleeding sequence used for a 4 wheel disc brake setup on a car would be similar to what you need to bleed the quad brakes, providing the master cylinder controls brakes on all 4 wheels.
hth
Rick, Ore :arms:
 
1 - 3 of 3 Posts
Top