Polaris ATV Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have a lock and ride front cargo box on my sportsman 550 and recently built a removable wood carry-all box to install on top. For chainsaw, extra gear/etc. Worried about is sliding around when strapped down so I decided to build a 1/4" plywood boss on the bottom of it to allow it to lock in place with the recessed pattern in the top of the Lock-N-Ride unit. If anyone is interested in the template to make one, I can email a file to print it out. I'm a NEWBIE to forum but will add pictures if I can and anyone needs a visual.
 

·
Premium Member
Joined
·
1,311 Posts
Sent a PM.
 

·
Registered
Joined
·
2 Posts
Discussion Starter #4
Here are a few Pics. It's not much but does help to keep the box from sliding around on top of the Lock N Ride.
To make the pattern, I taped some heavy cardboard down and hammered the pattern into it with rubber mallet and then cut it out and transposed to 3/16" plywood. I wanted to keep the dry storage of the Lock-n_Ride but have an easily removable box for bulky items like chainsaw etc. Hope it helps.
 

Attachments

  • Like
Reactions: 303British
1 - 4 of 4 Posts
Top