Polaris ATV Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
67 Posts
Discussion Starter #1
Good evening.

In the process of replacing the rear swing arm pivot bearings & seals on our 2001, 325 Magnum 4 X 4, I noticed a discrepancy on the pivot pins.

As removed from the machine, the adjustable pin(# 11) was located on the R.S. of the machine, yet the diagram on Polaris Parts website shows the adjustable pin being installed on the L.S.

Does it really matter?

TIA!
Screenshot_20200329-215413_Samsung Internet.jpg
 
1 - 1 of 1 Posts
Top