[Cousineddy]

I noticed my coolant over flow bottle was empty after I picked up my ATV (2022 sportsman 570) so I added some Polaris antifreeze. About an hour later I noticed it was slow dripping from the bottom of the coolant bottle at the hose connection. There isn't a clamp on the hose going to the bottom of the over flow bottle. Does anyone else have a clamp there?
Thanks.

 

[pcaster]

Looks to be a 90 degree barbed elbow fitting that the bottom hose pushes onto - no clamp. Is it leaking from the hose and the barbed elbow or is the reservoir leaking around where the fitting inserts into the reservoir? If its from the hose around the barbed fitting, add a hose clamp or a zip tie.

 

[Cousineddy]

It's leaking at joint #2 coming out of the hose on the barb. And yes I am just going to put a hose clamp on it but I was wondering if it was supposed to have one from the factory.

 

[pcaster]

Nothing showing a clamp in the diagram.

 

[Cousineddy]

Nothing showing a clamp in the diagram.

Where did you find that part diagram? Is that from a public website that it can be downloaded?

 

[FPD218]

Browse just fill in the three tabs on the top of your exact machine

 

[Cousineddy]

Browse just fill in the three tabs on the top of your exact machine

Thank you!