Polaris ATV Forum banner

Need a picture favor

1K views 8 replies 2 participants last post by  tomahawk 
#1 ·
Does anyone have, or can take a picture of your rear lower a-arm to frame mounting bracket so that I can see if mine is bent?

I bent my 2" receiver hitch upwards using a disc and pushed it back down but I'm not sure if it was just the receiver plate bending or the U shaped arm mount that it bolts to bent as well. I've not got another machine around that I can compare it to.

Thanks.
 
#4 · (Edited)
Ok,......will send you a pm

Can you see pics that are posted here?


 
#5 ·
Nah. Can't see anything linked back to photobucket. Has to be posted up from tapatalk or an attachment on this site before I can see it at work.
 
#6 ·
See if this works........
 

Attachments

#7 · (Edited)
Ahhh.. yes it does. Got anything from the side so that I can see what sort of angle it is at in relation to the hitch, ground, what have you? I'm thinking the bracket may be tilted downward now, putting that a-arm in a bind.
 
#8 ·
Will take a few in the am.........

You are trying to assess if the hitch receiver and structure is bent, correct?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top