Polaris ATV Forum banner
1 - 3 of 3 Posts

· Registered
18 Posts
Discussion Starter · #1 ·
Replaced coil. Now at the plug boot I put a test probe in it and fire it up and îts showing its grounding out . Coil ends are showing there's a ground it seems like everywhere there is suppose to be power it's ground and yea I made sure the power probe is connected right. Thanks in advance
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.