Polaris ATV Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
hey guys. i have a 2001 polaris trailboss 325. i recently put in a big bore kit and stretched it 4 inches. but there is only 1 problem. i keep strippin the splines on my wheel hubs. so ive descided im not going to use those cheap aluminum sock hubs anymore. im going to buy steel. but dose anyone know what size the bore is for these hubs? i know there 4 bolt on a 4 inch circle 24 splines, but i dont know what size the bore is? plz reply asap. want to get back on my rig!
 

·
Premium Member
Joined
·
20,001 Posts
Welcome to the board!:med:
 

·
Registered
Joined
·
1,097 Posts
Welcome to the forum!
Sorry, I don't know the answer to your question. You should be able to use a micrometer to measure the diameter of the splined area of your axle to get the bore size.
 

·
Registered
Joined
·
214 Posts
^^ agree ^^. Welcome to the board !!!
 
1 - 5 of 5 Posts
Top