You'll have to repair the bad connection if possible... If the break is inside the box you'll need a new cdi.
Here's a link to one on ebay. There are many more available too. Just make sure the plugs match up to your old one before ordering.
I have a 2000 Polaris expedition 425 it had been sitting for about 5 years i got it started it drove for about 2 minutes then die. I would wait 30 seconds it would start fine then die when i touched the throttle then it would start run fine then die again i replaced carb and cdi and spark plug...
I have a question about brake lights/tail lights. My tail lamps are on when ever the ATV is running, the brake light comes on when I apply the front brake, the brake lights do not come on when the rear brake is applied . Is this all normal ?
A forum community dedicated to Polaris ATV owners and enthusiasts. Come join the discussion about Rangers, Sportsmans, Scramblers, Magnums, and others. Research modifications, troubleshooting, maintenance, and more!