Polaris ATV Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
157 Posts
Discussion Starter #1
i took the secondary clutch off my 2009 500HO non ebs and replaced the buttons and need to know how to preload the spring back to the proper place and also is the spring in #2 holes on both ends.i watched a video and it said 1/3 rd round and when i put it back together high range works and reverse but low range seems like it is in high.any help would be apreciated.thanks
 

·
Registered
Joined
·
5,753 Posts
You have the correct holes for the spring. With it face down rotate the upper sheave CCW about 1/4-1/3 turn. Just need to get the helix ramps past the next button in line of rotation to preload the spring. Then press it down and put the washer and clip back on.
 

·
Registered
Joined
·
157 Posts
Discussion Starter #3
thanks, i thought i did that,put in high gear and it felt great and put it all back together to realize low wasnt rite.i will pull it back apart now.thanks for the help
 
1 - 4 of 4 Posts
Top