Polaris ATV Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
Have spent a lot of time reading the comments in this group, looks like a great group, looking forward to being a part. I am having a problem with my scrambler, have been unable to figure out, hope someone in here will have an idea. Have a 2000 scrambler 500 4X4. All electrical had been working fine on it. I slopped some gas when filling it up (in a hurry of course) so took a hose a rinsed off the fuel tank area. When I then started it up I noticed the neutral and reverse light was not working. On further checking found the 4X4switch is not working, the reverse limiter, and the neutral safety start switch also not working. It starts and runs fine and the head lights and brake/tail light works fine. Unable to find any loose wires. Any ideas? Thanks
 

· Registered
Joined
·
344 Posts
welcome ..... You might want to check your fuses, may have blown one .
just a thought..:)
 

· Registered
Joined
·
6 Posts
Discussion Starter · #5 ·
Thanks, that has been a problem, the Scrambler is new to me, have looked all over and checked the book, unable to find any fuses at all. Any one worked on Scramblers able to tell me if and where they are? I have a number of friends with other bikes, have checked all the suggested locations, unable to find anything!
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top