could be the starter gear going. known for that

 

https://www.dbelectrical.com/produc....com/products/polaris-atv-starter-drive-bendix-2-4-stroke-engine-6191-2962.html

 

I took the new solenoid out and put the old one back in and when my daughter went to start it it fired right up. Now I am more confused than when I started this process! I am thinking that is it it is a connection related issue since the problem comes and goes. Anyone have a good way for me to start testing? Thanks!!

 

I work for a rental company and we have 43 of these bobcat units. You need to check the crank wire from key switch to the solenoid.
There is also a safety switch on the brake pedal. Brake pedal has to be pressed for the starter to engage.

Check the harness going to start solinoid. Should have 12 volts when key switch crank position foot on brake. Oif not check wire coming out of key switch for 12 volts. Oif ok go test switch for continuity at foot brake. Should be easy to track down if you know how to use a multimeter

 

Thank you for your insight. A buddy of mine suggested that it could be a break sensor but when I turned the key on (without starting machine) the break lights come on which led me to believe it may be something else or that connection is loose/corroded.

I will head back up north this weekend and bring my multimeter. I am not the best with it but I'll do my best to get through the steps you recommend. Thanks for your time, I appreciate it!

 

I have a Bobcat 3400 XL. It has a plastic/polyethylene skid plate which is virtually destroyed. My Bobcat dealer cannot find this in his parts program. A part number would be extremely helpful if possible
Please email thermroberts638@gmail.com
Thank you

 

I have a Bobcat 3400 XL. It has a plastic/polyethylene skid plate which is virtually destroyed. My Bobcat dealer cannot find this in his parts program. A part number would be extremely helpful if possible
Please email
Thank you

Welcome to the forum

 

Do you need the front, rear or both skid plates?