New to the forum so please take it easy on me. I recently aquired a 95 magnum 325 2x4. I had it running one time and nothing since. I have read all the no start posts and they all seem similar to my dilema. It had dead gas in it wich i feel that I got cleaned out pretty good, I did not open the carb. It cranks, has compression and spark and when I open the drain on the bottom of the carb gas comes out so I assume it has fuel. I have try chocking the inlet with my palm etc.. Someone did bypass the fuel pump and made it gravity feed. Was told locally that should be fine but I am not sure. Any and all help is greatly apprecieated.. Dave
modelaman
need advice
O.k. after tons of hours working on my magnum 425, i rebulit the starter and found the battery to be week. It would only start after a few minutes on the charger. Then it would fire right up. It sounded soo good and I had run it sitting in the driveway mutiple times. I did screw myself when it came to a screeching holt. I forgot to tighten the three cam sproket bolts and lost two. One was sitting right at the top while the other went down and munched the small sproket and broke the chain. I know , I have already kicked my own ass over the deal but what do you do?? Seems to be plenty of parts available but I want to make sure I dont have any chips or chunks floating around. What should I do?? Anyone have a chain and gears for sale cheap?? Help Again! Dave
O.k. after tons of hours working on my magnum 425, i rebulit the starter and found the battery to be week. It would only start after a few minutes on the charger. Then it would fire right up. It sounded soo good and I had run it sitting in the driveway mutiple times. I did screw myself when it came to a screeching holt. I forgot to tighten the three cam sproket bolts and lost two. One was sitting right at the top while the other went down and munched the small sproket and broke the chain. I know , I have already kicked my own ass over the deal but what do you do?? Seems to be plenty of parts available but I want to make sure I dont have any chips or chunks floating around. What should I do?? Anyone have a chain and gears for sale cheap?? Help Again! Dave
I have a 90% complete motor. I sold the cam and rocker assembly off of it. The motor when running pumps oil out the vent tube from motor to air box. Make me an offer including shipping. I still have the chain and sprocket. This engine was running before I removed the camshaft. Not smoking or knocking. I don't know exactly what was causing the oil to pump out. It might be a stuck ring, not sure. So I started parting the atv out. Thanks
I don't have a starter and bendix. dbelectrical is where I get my aftermarket starters from. They are good starter and have a good price.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
