Polaris ATV Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hello there, I am rebuilding my stolen 2006 polaris outlaw 500,I have had new bearings put into the rear carrier and when fitting the rear disc I have noticed a little bit of movement in the disc side of the carrier(2 ml max) but the sprocket side is nice and tight,I am not sure if there was any movement there before the new bearings were fitted,i just wanted to see if this was a common thing on this atv, a little information before i continue with the rebuild would be great.
 
1 - 1 of 1 Posts
Top