Polaris ATV Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Need some help here fellas trying to change the universal joints on the front prop shaft and not fully sure how to get the shaft out of the machine
 

·
Premium Member
Joined
·
20,001 Posts
Welcome to the board!
 

·
Registered
Joined
·
23 Posts
I just recently did mine, I don't know if there is an easier way but I had unbolt the front diff to make enough to slide the yoke of the spline at the gearbox end. If you find an easier way I would be interested to know.

I had to replace the whole shaft on mine because the previous owner never greased it and the yokes were trashed.
 
1 - 4 of 4 Posts
Top