[Charalarms]

I have a 09 that I use for plowing and it started to get real hard to shift out of low. This happens most all of the time when plowing now. I have made sure the idle is below 1000rpm but it still shifts hard. I usually have to shut off the engine to get it to shift out of low. Does anyone know of this problem and what I can do to fix it please?

 

[FPD218]

to the forum

 

[latebird]

I have a 09 that I use for plowing and it started to get real hard to shift out of low. This happens most all of the time when plowing now. I have made sure the idle is below 1000rpm but it still shifts hard. I usually have to shut off the engine to get it to shift out of low. Does anyone know of this problem and what I can do to fix it please?

Usually a clutch issue - might be the EBS one way bearing is failing or has failed - service the clutches

 

[Charalarms]

I bought and installed the secondary clutch 3 days ago and the same problem continued. I'm going to order the primary clutch to see if there is a good result