Polaris ATV Forum banner

1 - 1 of 1 Posts

1 Posts
Discussion Starter #1
Hello ATV Brother.

Here is what I have got to share with you and I need your assistance.

My actual measurements are:

1)Between "washer-3232018" and "gear spur-3234352" is a gap which is about 0.6 mm.

There is a video attached to this message

Also I attached a photo, please have a look at it.

2)Between "washer-3234248" and "gear spur-3234291" is a gap which is 0.25mm.

3)Between "washer-3234248" and "gear spur-3234290" is a gap which is 0.25mm.

I couldn't find any measures in the service manual "Polaris Touring 2012", so here is a question, what gaps should be between washers and the gear spurs?


1 - 1 of 1 Posts