Polaris ATV Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
My xepedition 425 has the 5-speed manual tranny. I noticed that when started from cold, the clutch was slippping in any gear. The bike would barely move, but after 10 minutes or so and some slow riding, things warmed up and there didn't seem to be much of an issue.

So I changed the main centrifugal clutch. Filled the tranny with Polaris Oil, and low and behold.. It seemed better. But things progressively got worse, and the clutch was slipping all the time. But now, after a few days of driving, it is slipping worse than ever. So, I'm thinking changing the centrifugal clutch did nothing.

The question is then, should I change the shifting clutch that changes gears? Or what could be the problem?
 

·
Premium Member
Joined
·
20,001 Posts
Welcome to the board!:rockwoot:
 
1 - 2 of 2 Posts
Top