Polaris ATV Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
hi all, new to forum, i have a 2006 500 with power module part number 4011240 are any other power modules from the same quads with different part numbers interchangeable? for eg 4011517. i am in australia and wonder if the different part numbers might be for some stupid emissions requirement and all of the different modules for this model will work?
 

· RIP 12/21/22
Joined
·
16,288 Posts
If the plug is the same the module from a similar machine might work... BUT, your machine is an X2 model given the number you posted. As such, it has "turf mode" with a lock out differential in the rear. That controller module makes it work. A module from a different machine without turf mode wouldn't let it operate but would likely be the same otherwise.
 

· RIP 12/21/22
Joined
·
16,288 Posts
I'm just kinda guessing mate. The only difference in your machine and similar models is turf mode so I suspect that's why the difference in the part number. Can't tell you for sure.
I think your X2 is the only model with turf mode in that year range.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top