Polaris ATV Forum banner

Project Butterfly (03 polaris sportsman 90cc)

245 Views 8 Replies 1 Participant Last post by  Grego Garcia
3
This is my current project i am beautifying and referbing this lil 2 stroke for my daughter i will update on here regularly to show the progress.
These were pics of the base i am working with and the lil cutie i get the pleasure of personalizing it for.
Sent from my SM-S908U using Tapatalk
See less See more
  • Like
Reactions: 1
1 - 9 of 9 Posts
4
Stage 1 (Clean up, Debadge, and De-rack.)Sent from my SM-S908U using Tapatalk
See less See more
  • Like
Reactions: 1
3



Some plastic tab repair for the handlebar faux light pod upper.
Sent from my SM-S908U using Tapatalk
See less See more
15
Some plastic tab repair/rebuild for the handlebar faux lightpod lower. Both tabs were sheared off needed rebuild via the plastic welder an pp stick.















Sent from my SM-S908U using Tapatalk
See less See more
Handlebar faux lightpod fixed ready for roughing for paint!

Sent from my SM-S908U using Tapatalk
See less See more
  • Like
Reactions: 1
7
More plastic moulding repair right side footwell.

Sent from my SM-S908U using Tapatalk
See less See more
8
More plastic moulding repair right side footwell. Cont.

Attachments

See less See more
6
More plastic moulding repair. Footwell cont..ect

Attachments

See less See more
4
Finally laying some paint down!! I think i over roughed the plastics, i have alot of plastic frey poking up form under the paint i have some 1200 grit. Hopefully some wetsanding will smooth it all back out then 3 final coats after that
See less See more
  • Like
Reactions: 1
1 - 9 of 9 Posts
Top