Polaris ATV Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
89 Posts
Discussion Starter #1
I rolled my 2004.5 600 and now the handle bars move back and forth.all 4 nutts are tight on the handle bars.it seems Like the assembly is moving a little bit.is there some type of bushing that the steering column goes through that could be broke
 

·
Registered
Joined
·
1,912 Posts
you might of strips the threads or alum. groves on the handle bar block or the groves on the handle bars themselves
 

·
Registered
Joined
·
89 Posts
Discussion Starter #3
Its not so much the handle bars but the steering column that goes down to the steering assembly.it moves back and forth a little bit
 

·
Premium Member
Joined
·
12,301 Posts
there is an upper mount. its a u- clamp and bushing. probably should take the front clip off and do a thorough inspection.
 
1 - 4 of 4 Posts
Top