Polaris ATV Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Polaris Sportsman 600 Twin started to eat belts and finally it destroyed the bearing/pushing in the secondary clutch. There was crashed metal in the box.
I have the new pushing but wondering what is the function for that because it does not fit into the inner plate. Is it just hanging there on the axle inside the spring? There is then a big tolerance within the axle and the plate. The washer shown in the part picture is much bigger for real as can be seen in the 1st pic. In the 2nd pic the bearing/pushing is in his place as well as the washer. The part numbers do match but somehow it is not logical.. Any hint? Thank you in advance!
 

Attachments

1 - 1 of 1 Posts
Top