Polaris ATV Forum banner

1 - 3 of 3 Posts

·
Premium Member
Joined
·
3,843 Posts
Discussion Starter #1
I received a email from a customer that purchased one of our ATV tie down system over a year ago. It was installed on their company trailer and was in a major accident. The unit they was hauling was a 1900LB Kubota UTV with equipment in the bed of it pushing the weight of the unit over 2000 lb!! The system did its job and kept the UTV in place. Both the truck and trailer were totaled.

Our Mighty Tite system is 100% made of metal. No straps to loosen or break. It is also 100% made in America! See email below.

Thor

ATV tie down system for your Quad or UTV?

-------

Accident in Baton Rouge, LA. Mighty-Tite in use during double-airbag deployment accident. The ATV remained in place. Several comments by law enforcement and emergency workers complimenting performance of the ATV anchoring system.

The driver in oncoming lane was distracted by something and drove left-of-center, our driver reacted to avoid a head-on. The impact was glancing on the front driver's side. Three cars total were forced off the road. At-fault driver was ticketed for careless operation and driving left-of-center. No serious injuries.

Our replacement for the damaged Mighty-Tite system arrived yesterday and will be installed on a new trailer this week.


















Remember we test and use the products we sell. If you have any questions regarding this or any other product we sell feel free to call the shop at 815-321-3888 and ask for Thor.

ATV tie down system for your Quad or UTV?
 

·
Registered
Joined
·
7,464 Posts
Neat..... but unfortunate testimonial Thor!
 
1 - 3 of 3 Posts
Top