Polaris ATV Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
89 Posts
Discussion Starter #1
I have a 2004.5 600 with 100 hours on it and just put 28/10/12 silverbacks with wheel spacers and a 2 inch lift.now the tires are leaning out(from top side).could this be caused by taking the shock off and letting it stretch out or is there something else going on
 

·
Premium Member
Joined
·
20,001 Posts
Welcome to the board!
 

·
Registered
Joined
·
2,402 Posts
It is normal to have a little bit of positive camber when installing the 2" lift. Think about how it is being lifted. The strut and a-arm is being pushed down 2", without re-locating anything. Unfortunately, there is no camber adjustment on these.
 

·
Registered
Joined
·
2,350 Posts
Need new control arms, the lift has changed the geometry of the control arms.
 
1 - 4 of 4 Posts
Top