Polaris ATV Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
hi gang.i just aquired this 1992 350,fair condition.except that when i took off
the carb to clean i discovered a hole in the case over the crank...
yep,looks like a thrown rod.now i'm not having much luck finding a used
engine for this thing,but i do see a few 250 motors.so i'm starting to
wonder if it might be feasible to throw a 250 in there...
anybody ever hear of this being done? or would some other engine type
do the job? thanks guys [and gals] paul
 

·
Registered
Joined
·
54 Posts
anythings possible

well im not shure i would want to go to all the trouble but if thats what you want to do yes its possible. you just have to be able to fab the needed mods. iv seen many retros online and things i never thought you could do. its just a matter of mind over metal. i do a lot of things that a few would call strange but it works for me and i say go for it if you think you can fig it out. what you have to ask yourself is( is it worth the work or can you buy a runninq quad for what it will cost to retro the one you have) GOOD LUCK
 

·
Premium Member
Joined
·
20,001 Posts
Welcome to the board!
 

·
Registered
Joined
·
441 Posts
howdy n good luck , give us the out come.
 
1 - 5 of 5 Posts
Top