Polaris ATV Forum banner

trailblazer belt slipping

4K views 4 replies 2 participants last post by  maverick 
#1 ·
hey im new to the forum and i was hoping you guys could help me out. i have a 2001 polaris trailblazer and the belt keeps slipping on me. i just bought a new one and put it on and it rides for like 15 min then slips. i took the cover off and it was wet inside, so i cleaned the belt and sealed it back up tight, once again 15 min ride and its slipping. idk if there is a seal somewhere that that is bad or what, the seal in between the plastic cover seems to all be there and in good shape, i have noticed some liquid in the airbox that connects to the cover, so i tried to clean it out and i put a rag there for a filter so if there was liquid in there, the rag would soak it up, but it started slipping again. i am tired of taking this thing apart just to get a 15 min ride any one have any ideas? thanks
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top