[Trailsblazed420]

I bought an 03 trailblazer that runs good but it needed some things, I have everything figured out but the upper steering shaft pivot point, I'm pretty sure there needs to be a bearing in there but I can not find any info about it, I can only find lower pivot bearings, here are a couple pictures of the upper steering pivot and trying to show how much play it has..

Well I guess I can only upload 1 at a time and it is upside down..

 

[Trailsblazed420]

Here is the other..

 

[polman500]

It has plastic bushings #3 and a grease fitting #2 to keep them from wearing out again if you use it.

 

[Trailsblazed420]

Do you know anywhere that I can order it from?

 

[dwhst9]

A lot of gen3 polaris guys use an automotive stabilizer bushing instead. Take a look over on the gen3usa.com forums. There are many threads there showing how to do this and what part# they used.

 

[Trailsblazed420]

Thanks man, I found out all the information I need, I'm going to use the automotive bushing since its much more durable..

 

[dwhst9]

Awesome!