Polaris ATV Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
The cylinder on my 2000 Trail Blazer 250 seized. I have taken it apart and the cylinder is being overhauled. During the disassembly process I found several very brittle, yellow hoses that appear to be vent lines. There is a larger hose that come from the front differential and goes up to the area of the handle bars that is not connected to anything. There were two lines that went down the handlebar shaft and there was one that appeared to go rearward in the frame. I hate to have to buy a $50 manual just for this. any ideas? Thanks, Y'all
 

·
Premium Member
Joined
·
20,001 Posts
I've been through Roy before, don't blink!:)
 
1 - 2 of 2 Posts
Top