Polaris ATV Forum banner

Pictures of your XP

1 reading
683K views 1.1K replies 409 participants last post by  beantown  
#1 ·
Post them and be proud!

Image


Image


Image
 
#205 ·
2012 850HO XP EPS


27x9x14 Mud Lite XTR Radials Front
27x11x14 Rears on ITP SS Alloy 112 Wheels
WARN XT40 ATV Winch With Mile Marker Synthetic Rope
Moose Front Bumper
Moose A-Arm Guards and Skid Pan
Jstrong AM-FM-CD Satellite MP3 Player Stero System
Pure Polaris Lock N Ride Seat
Polaris Sportsman XP HID Factory Replacement Light Kit on order from Thor
 

Attachments

#206 ·
Bear, nice looking ride! Can you feel the increase in power on the HO? Also can 2 adults fit on the seat comfortably with the rear box?
 
#207 ·
Well it feels like it has plenty power until I get it broke in I will not know for sure. This seat no but I am ordering the Seat from Thor that will allow the 2 rider even though it is not recommended :) He has the setup to make it Lock and ride
 
#209 ·
ITP SS212s (Black) & GBC Spartacus'

Here are some pics of my 850XP. Had to give it a bath before I put the new shoes on. Note: I will never wash my bike again without the tires off of it. That made things so much easier.

Here's the stock shoes at my old duck blind

Image


Now time for the new stuff!

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image


Now it's time to go find some mud!
 
#211 ·
Yea, I thought the same thing when I got it off the jack stands. They are about 1.5 - 2" wider than stock. The only problem is; where I deer hunt, it's extremely tight and I wonder if I will just rip flares off.

If I don't get them, I'm going to get muddy when I go duck hunting though.

What to do... what to do....

UTG
 
#213 ·
utgreenhead, that is a nice looking bike......make me wish I had stealth black. What size tires are those?
 
#214 ·
#218 ·



my 850:)
 
#221 ·
I got mine set up for the trails. Ready to head the Mena next week!!!!!!!

Image

Image

Image

Image
 
#222 ·
I got mine set up for the trails. Ready to head the Mena next week!!!!!!!
Looks good, you rockin' some stealth snorks from triangle?
 
#223 ·
Yes sir!!!! Great design. I have never rode this thing on anything smaller than a 30" tire.


Sent from my iPhone using Tapatalk
 
#224 ·
Yes sir!!!! Great design. I have never rode this thing on anything smaller than a 30" tire.
I see it in your sig now, sorry for the redundancy but it didn't come up in the post with the pics. Lots of nice mods there!
 
#225 ·
Its cool!!!!!!! I did not have my sig loaded until after I loaded the pics.
 
#230 ·
I only notice it on the right side by my leg, and it's not as bad as the stock pipe was.
 
#232 ·
hemi,
How did you remount your heat shield with the Hot Seat? My instructions say to remove it and I couldn't figure out a way to get my can mounted with it on.

UTG
 
#233 ·
I cut slots in the heat shield where the mounting tabs on the muffler go up through, I used a die grinder with a cut off wheel, worked great. I can try to get a pic if you need one.
 
#235 ·
haveing some fun
 
#238 ·
what kind of springs u got on your shocks and how do u like them
 
#241 ·
i will get a set for mine then thanks for the help
 
#242 ·
These are some pics of my 850 when I had a Catvos 3" raked lift. (it's for sale now)


Sent from my iPhone using Tapatalk
 

Attachments

#243 ·
Image
Image
Here is a pic of my 850 stock setup with 32s. Lift and exhaust are for sale.


Sent from my iPhone using Tapatalk